วันศุกร์ที่ 8 มีนาคม พ.ศ. 2556

We drive a toy car R / C with an IR remote control

In this new tutorial we are going to explain the basis for the control of Arduino via an IR remote control (like the TV).

We drive a toy car R / C with an IR remote control

Sometimes you have to put the hands of the hard drive partitions and if you have to delete one to free up space, or create a different structure, many are able to distraction, to remove the wrong one. Or Windows itself, perhaps as a result of an unplanned shutdown of the computer may not recognize a disk partition.

At this point, what can you do to try to recover the "lost partition"?

In addition to Testdisk and Easeus partition recovery, now we also have Mini tool partition recovery, program, downloadable from this address, which requires the installation, and is distributed for free in only for home users and non-commercial organizations.

We can not guarantee 100% recovery partition and the data, much also depends on the cause of the cancellation of the partition.

The best thing to do in these cases, is to intervene immediately, do not make other operations, such as recreating the partition, formatting or groped if inaccessible, then you could cause irretrievable loss of data.

Operation

When the program starts, after installing it, tells us that the partition type supports FAT12, FAT16, FAT32 and NTFS.

Select the disk that contains the deleted partition, in this case consisted of the entire space of the hard disk, which I installed on a computer other than the original because I had purposely deleted the content. There may also be parts of the same hard disk, with an operating system is still running, and you delete only the data partition, so it is not always necessary to rely on a second computer to solve the problem and recover the partition.

Since I had deleted the entire disk, confirm the Full Disk.

I run fast (Quick Scan), if this fails, and did not find the lost partition, you can try the Full Scan, a more slow.

In a few seconds, the Quick Scan, found the lost partition and the characteristics he had.

Before proceeding, recommend that you close all open applications and disable any standby computer, not to disturb the recovery operations underway.

I ran the tests with hard disk size is not very large, from 80 GB to 320 GB, and has always taken a few seconds to recover lost partitions. Even with very large disks, partitions or complicated to recover, time may be increased.

At this point, you have to do is wait until the end of operations.

And wait for the confirmation message of the recovery of the deleted partition.

I wanted to try to delete a partition and then recreate it, in this case the old partition is irretrievably lost and the program is not able to retrieve it.

Sometimes you have to put the hands of the hard drive partitions and if you have to delete one to free up space, or create a different structure, many are able to distraction, to remove the wrong one. Or Windows itself, perhaps as a result of an unplanned shutdown of the computer may not recognize a disk partition.

At this point, what can you do to try to recover the "lost partition"?

In addition to Testdisk and Easeus partition recovery, now we also have Mini tool partition recovery, program, downloadable from this address, which requires the installation, and is distributed for free in only for home users and non-commercial organizations.

We can not guarantee 100% recovery partition and the data, much also depends on the cause of the cancellation of the partition.

The best thing to do in these cases, is to intervene immediately, do not make other operations, such as recreating the partition, formatting or groped if inaccessible, then you could cause irretrievable loss of data.

Operation

When the program starts, after installing it, tells us that the partition type supports FAT12, FAT16, FAT32 and NTFS.

Select the disk that contains the deleted partition, in this case consisted of the entire space of the hard disk, which I installed on a computer other than the original because I had purposely deleted the content. There may also be parts of the same hard disk, with an operating system is still running, and you delete only the data partition, so it is not always necessary to rely on a second computer to solve the problem and recover the partition.

Since I had deleted the entire disk, confirm the Full Disk.

I run fast (Quick Scan), if this fails, and did not find the lost partition, you can try the Full Scan, a more slow.

In a few seconds, the Quick Scan, found the lost partition and the characteristics he had.

Before proceeding, recommend that you close all open applications and disable any standby computer, not to disturb the recovery operations underway.

I ran the tests with hard disk size is not very large, from 80 GB to 320 GB, and has always taken a few seconds to recover lost partitions. Even with very large disks, partitions or complicated to recover, time may be increased.

At this point, you have to do is wait until the end of operations.

And wait for the confirmation message of the recovery of the deleted partition.

I wanted to try to delete a partition and then recreate it, in this case the old partition is irretrievably lost and the program is not able to retrieve it.

From 2005 to 2009, the user behavior is marked by caution. At the end of 2009, the setting is changed. Users, probably confused by the new situation, they shared more information through news feeds, and personal profiles. In 2011 was introduced the timeline, the number of fields available compilation has increased, as well as published information.

In general we can say that each user responds positively to the news, the feeling of personal security increases and the publication of shared content follows the trend. The features related to privacy free the mind from qualms related to sharing photos. Users test the new functionality even if this requires them some adaptation.

Sometimes you have to put the hands of the hard drive partitions and if you have to delete one to free up space, or create a different structure, many are able to distraction, to remove the wrong one. Or Windows itself, perhaps as a result of an unplanned shutdown of the computer may not recognize a disk partition.

At this point, what can you do to try to recover the "lost partition"?

In addition to Testdisk and Easeus partition recovery, now we also have Mini tool partition recovery, program, downloadable from this address, which requires the installation, and is distributed for free in only for home users and non-commercial organizations.

We can not guarantee 100% recovery partition and the data, much also depends on the cause of the cancellation of the partition.

The best thing to do in these cases, is to intervene immediately, do not make other operations, such as recreating the partition, formatting or groped if inaccessible, then you could cause irretrievable loss of data.

Operation

When the program starts, after installing it, tells us that the partition type supports FAT12, FAT16, FAT32 and NTFS.

Select the disk that contains the deleted partition, in this case consisted of the entire space of the hard disk, which I installed on a computer other than the original because I had purposely deleted the content. There may also be parts of the same hard disk, with an operating system is still running, and you delete only the data partition, so it is not always necessary to rely on a second computer to solve the problem and recover the partition.

Since I had deleted the entire disk, confirm the Full Disk.

I run fast (Quick Scan), if this fails, and did not find the lost partition, you can try the Full Scan, a more slow.

In a few seconds, the Quick Scan, found the lost partition and the characteristics he had.

Before proceeding, recommend that you close all open applications and disable any standby computer, not to disturb the recovery operations underway.

I ran the tests with hard disk size is not very large, from 80 GB to 320 GB, and has always taken a few seconds to recover lost partitions. Even with very large disks, partitions or complicated to recover, time may be increased.

At this point, you have to do is wait until the end of operations.

And wait for the confirmation message of the recovery of the deleted partition.

I wanted to try to delete a partition and then recreate it, in this case the old partition is irretrievably lost and the program is not able to retrieve it.

From 2005 to 2009, the user behavior is marked by caution. At the end of 2009, the setting is changed. Users, probably confused by the new situation, they shared more information through news feeds, and personal profiles. In 2011 was introduced the timeline, the number of fields available compilation has increased, as well as published information.

In general we can say that each user responds positively to the news, the feeling of personal security increases and the publication of shared content follows the trend. The features related to privacy free the mind from qualms related to sharing photos. Users test the new functionality even if this requires them some adaptation.

Introduction

Ah, it is true that the old memories are those that remain ... have you ever thought of wanting to resurrect your old and beloved RC toy car and give her something special, such as the ability to be controlled using a remote control? Well, this is not fantasy, it can be done with a little 'passion and a few Euros. Let's see how:

Materials Required

Arduino Uno/2009 generic IR Remote (works with any type of remote control) IR receiver matrix board 2x Chip L293 (Dual H-bridge up to 1A) Datasheet 2x Zoccoletti chip 16pin cables from various soldering and tin Battery (If more than 7v can also the original use of the toy car RC)

It is conceivable that many of you to read "Welder and Pond" have pulled back, afraid of the possible difficulties that may be encountered in the design phase. Do not worry if you have no experience or are impractical to solder circuits exist on the market of ready-made like this, you can safely buy on eBay.

Before you begin to install the new circuit with Arduino, we have to remove the old one. If you want to set it aside to be ready to reassemble it, disconnect the wires one by one and put the signs to know where you had them removed.

Those who were not interested in maintaining the original circuit, simply go to "weed out" all while keeping only the two wires for each motor and the battery cables (usually staying in the toy car).

Wiring diagram

See Pictures and Read more : We drive a toy car R / C with an IR remote control

ไม่มีความคิดเห็น:

แสดงความคิดเห็น